Powertec's Dual-Mount Ceiling antenna is an omni-directional antenna with a modern design. It comes with two (2) mounting options making it an excellent choice for offices, houses and other in-building applications.
FEATURES:
- 5G Ready: Covers 698–4000MHz (5G, 4G LTE, and 3G frequencies)
- Flexible mounting and positioning to both plasterboard and solid ceilings
- Light, modern and compact design (28 x 28 x 4.5cm / 0.8kg)
- N-female pigtail cable attachment
- 3.5 to 6dBi gain
PACKAGE CONTENTS - Powertec Dual-Mount Ceiling Antenna 698-4000MHz
- Threaded Fixing Nut
- Screws & Anchors
- Metal Mounting Plate
MOUNTING - Above Ceiling Mount (Roof Cavity) - Drill a 2.5cm (1 inch) in the ceiling. The hole should be large enough to allow the antenna's threaded plastic cable base to pass through.
- Push the antenna into the ceiling surface with antenna cable passing through the ceiling hole.
- Use the Threaded Fixing Nut to secure the antenna by tightening around the threaded plastic cable base
- Connect N female antenna connector to N male low-loss cabling.
MOUNTING - Below Ceiling mount (Solid Ceiling) - Drill a 2.5cm (1 inch) in the ceiling. The hole should be large enough to allow the antenna's threaded plastic cable base to pass through.
- Use the Metal Mounting Plate to align, mark and drill 6 holes into the ceiling surface and insert provided anchors.
- Secure Metal Mounting Plate to the ceiling by inserting provided screws through the mounting plate (with interlocking pegs facing down) and into ceiling anchors.
- Push the antenna towards the bracket allowing the cable to pass through the ceiling hole. Align keyhole mounts on the antenna with down-facing pegs and twist them into place.
- Connect N female antenna connector to N male low-loss cabling.